Run the whole meet. Sign-up to results.
Opener handles registration, weigh-in, flights, lifting order, plate loading, scoreboards and referee lights on the phones, tablets and laptops you already have. It keeps running when the venue Wi-Fi doesn't.
Built for volunteer-run club meets. No hardware to buy, no servers to rent.
Meets run on goodwill and paperwork
Lifters train for months for your meet. Most meets are run by volunteers using a few tools that don't talk to each other.
Chasing names, dates of birth and divisions, then typing them all in again.
Paper slips for bodyweight, openers and rack heights, carried across the venue.
One laptop, one person who knows how it works, and no screen for anyone else.
Loaders doing plate maths under pressure while the next lifter waits.
Before, during and after
Set up and open entries
- Create the meet in the Opener app: events, divisions, weight classes and plates
- Add competitors in the app, or share a sign-up page so lifters enter themselves Meet Pass
- Organise flights before the day
Run the platform
- Weigh in, record openers and rack heights
- Lifting order worked out automatically as attempts change
- Scoreboards, loaders, warm-up room and referee lights on spare devices
Results, done
- Totals, placings and best lifter (DOTS, IPF GL or Wilks)
- A public results page for lifters to share Meet Pass
- One-tap export for OpenPowerlifting
Every screen in the room. No internet needed.
One app for every device. Install Opener on any spare phone, tablet or laptop and join the meet as a display. Enter the 4-digit PIN from the scoring table and it finds the meet over the venue's Wi-Fi. Nothing goes via the internet.
Who's lifting, what's on the bar, who's on deck. Big enough to read from the back of the hall.
Spotters see exactly which plates go on each side, worked out from your plate set.
Upcoming attempts so lifters and coaches can confirm the next attempt and time their warm-ups.
Updated after every lift, by weight class, flight or overall, with best-lifter points.
Three phones become a lights system, with a big lights screen for the lifter and the crowd.
Venue Wi-Fi that blocks devices from seeing each other? A phone hotspot or a cheap travel router gives the scoring table and screens their own network. No internet connection required.
Three phones. One set of lights.
Hardware lights systems cost hundreds. Opener turns your referees' own phones into one.
- Each referee picks their chair and gets two buttons, each half the screen
- Lights stay dark until all three have decided, so no one is swayed
- Decisions are final, then reset for the next attempt
- The scoring table records the result with one tap
Built for the way meets actually run
Multisport
Powerlifting, weightlifting and strongman presets, or build your own events in weight, reps, distance or time.
Online sign-up
Lifters register on a public page with their events and division, straight into your meet.
Works offline
Meet day runs on your devices. A dropped connection doesn't stop the platform or the screens.
One app, every device
Opener runs on iPhone, iPad, Android and Windows. The same app does setup, scoring, screens and referee lights.
Lifting order
Next lifter worked out from attempts as they change, with rack heights and plate maths built in.
Multiple platforms
Run each platform from its own scoring device, with its own screens and referees.
Best lifter
DOTS, IPF GL or Wilks points next to every total, with the option to rank by them.
OpenPowerlifting export
Results in the format OpenPowerlifting asks for, ready to submit after the meet.
Live pages for lifters
Each lifter scans their own QR code to enter their next attempt, check standings and time their warm-ups.
Public results page
Publish results to a page lifters can open and share, with places, best lifts, totals and points.
Teams & placing points
Score teams and award points by placing, for club and inter-gym competitions.
Fair comparisons across weight classes
Pick DOTS, IPF GL or Wilks when you set up the meet. Points appear next to each total in the standings, and one switch ranks the whole field by them. IPF GL uses the right coefficients for raw, equipped and bench-only.
| Pos | Lifter | Total | DOTS |
|---|---|---|---|
| 1 | Sam Doyle · 66 kg | 540.0 | 423.1 |
| 2 | Tom Okafor · 92 kg | 642.5 | 410.9 |
| 3 | Gareth Price · 120 kg | 710.0 | 407.8 |
Free to run your meet
Grassroots meets run on tight budgets and volunteer time. Running your meet in the app on the local network is free. Add a Meet Pass for online sign-up, a public results page, referee lights and live pages for lifters and spectators.
Run your meet
- Set up the meet and add competitors in the app
- Weigh-in, flights, lifting order and scoring
- Every screen: scoreboards, loaders, warm-up room and standings on any phone, tablet or TV
- OpenPowerlifting export
- Runs on the venue's local network. No internet needed.
Meet Pass
- An online sign-up page for lifters
- The meet kept safely online
- A public results page to share
- Referee lights on your referees' phones
- A private QR code for every lifter, opening their own live page to:
- enter their next attempt before the cut-off
- check the current standings
- time warm-ups with a live estimate of their next lift
- A meet QR code for everyone, with:
- live standings for the whole meet
- a running timeline for each flight and lift that adapts to the pace of the day
Bought in the Opener app by the organiser. Live pages update whenever the scoring table has a connection; mobile data is enough.
Clubs & federations
Running lots of meets, or looking after a region or federation? Get in touch and we'll find something that works for you.
Contact usGood to know
Do we need internet at the venue?
Not on the day. Meet day runs over the venue's local network: scoring, every screen and referee lights work without internet.
Online sign-ups before the meet and the public results page afterwards need a connection and a Meet Pass.
Do I need a separate app for screens?
No. Install Opener on every device and join the meet as a display. Keep them on the same Wi-Fi as the scoring table.
A Windows laptop connected to a projector or TV makes a great scoreboard.
Who pays for the Meet Pass?
The organiser buys it in the Opener app for the meet that needs it. It covers online sign-up, keeping the meet online, the public results page, referee lights and the live pages. Many organisers add a little to the entry fee to cover it. Lifters never pay us anything.
Running the meet on the local network, including every screen, stays free.
Do the live lifter pages need internet?
Yes. Lifters' phones are on mobile data, not the venue Wi-Fi, so live pages are updated through the internet while the scoring table has a connection. A phone's mobile data is enough. If the connection drops, the meet itself carries on as normal.
Do lifters need to download anything?
No. When the organiser has a Meet Pass, lifters sign up on a web page and see results on the public results page afterwards.
Which sports does it support?
Powerlifting (full power and single lifts), weightlifting and strongman have presets. You can also build custom events measured by weight, reps, distance or time, with your own totalling and placing rules.
Which best lifter formula should I use?
Use whatever your federation uses. IPF affiliates use IPF GL, many other federations have moved to DOTS, and Wilks is still common at local meets.
Can we submit results to OpenPowerlifting?
Yes. After the meet, export from the scoring screen to get the entries and meet files in OpenPowerlifting's format. Add the venue location to the meet file, then submit them through OpenPowerlifting's usual process.
Wasn't this called Manage My Comp?
Yes. Same team, new name, and a simpler setup: everything now happens in the one Opener app, with no account to sign in to.
One app for every device
Opener is coming to the App Store and Google Play. Want to use it for your next meet? Get in touch.
Contact usRunning a meet? Let's talk.
Questions, feature ideas or help getting set up. We'd love to hear from organisers, referees and lifters.